Ironmongery Specification Services in Singapore
Door-by-door ironmongery schedules, from first brief to handover
A door works as well as the hardware on it. A clear ironmongery specification makes sure every door in a building gets the right hinges, closers, locks and handles, with nothing missed and nothing ordered twice. Jecom works with architects, interior designers, consultants and contractors in Singapore to turn a door list into a practical ironmongery schedule, and can supply and install what is specified.
What is an Ironmongery Specification?
An ironmongery specification sets out what hardware each door needs and how it should perform: function, strength, finish, security level and the standards to follow. An ironmongery schedule applies that specification to the project. It lists every door, groups doors with the same needs into hardware sets, and names the items, quantities and finishes for each set.
In short, the specification says what is required, and the schedule says what goes on which door.
What Goes Into an Ironmongery Schedule?
The layout can follow your project format. Most schedules cover the following.
Item | What it covers |
Door reference and location | Door number, floor and room, so each line matches the drawings |
Door details | Door type, size, thickness, material, handing and fire rating where it applies |
Hardware set | The group of items shared by doors with the same needs |
Items and quantities | Hinges, closer, lock, handle, stopper and other fittings for each door |
Make, model and finish | The product reference and finish for every item |
Special requirements | Access control, accessibility, fire and smoke, or other project needs |
How We Work
Review the brief
We start with your door list, drawings and any consultant requirements, and ask about anything unclear.
Group doors into hardware sets
Doors with the same needs share one set, which keeps the schedule short and easy to check.
Select products and finishes
We suggest items for each set based on the door’s size, weight, use and security needs, and check them against each other for fit.
Share the schedule for review
Your architect or consultant can comment, and we revise it with you.
Prepare submissions
Where the project asks for them, we can provide product data and samples for approval.
Coordinate supply to site
We coordinate delivery to site, and our team can install and hand over the hardware.
What You Receive
- A door-by-door ironmongery schedule, grouped by hardware set
- Product data sheets for the items specified, where available
- A quotation that follows the schedule, by set or by item
- Delivery coordination to your site programme
- Installation and handover, where Jecom is appointed to install
What Helps Us Get Started
Send what you have, even if it is not complete. The more you can share, the easier it is for us to prepare a schedule.
- Door schedule or floor plans showing door locations
- Door types and materials, such as timber, metal or glass
- Fire, smoke or accessibility requirements from the project team
- Access control or security needs
- Preferred finishes and budget range, if available
- Tender or project timeline
Choosing the Right Ironmongery
The right choice depends on how the door is used. These are the points we usually discuss with project teams.
Material and finish
Stainless steel suits busy public areas because it is strong and durable. Brass and bronze are often chosen for appearance, and finishes can be matched across a project.
Function
A heavy or high-traffic door needs stronger hinges and a suitable closer, while a light internal door may need much less. We look at door size, weight and use before suggesting items.
Security
Locking needs vary from a simple latch to full access control. We help match the lock and key system to how the space is used.
Style
Hardware is seen and touched every day, so it should suit the design. We can suggest options that match the look of the interior.
Compliance
Hardware on fire-rated and accessible doors needs to meet the project's requirements. We work from the standards and approvals set by your project team and consultants.
A typical schedule includes door closers, floor springs, hinges, coordinators, mortise locks, cylinders, keys, panic hardware, smart locks, handles, stoppers, and automatic doors for hands-free entrances.
Who We Work With
Architects and interior designers: a schedule that follows the design intent and the drawings.
Main contractors and subcontractors: clear sets, quantities and delivery timing for the site.
Developers and project managers: one team for specification, supply and installation.
Building owners and facility managers: hardware that is easy to maintain, with support after handover.
Brands We Specify
We work with manufacturers whose products we know well, so product advice comes from the people who supply and install them.
DOOR CONTROLS
door closers, locks, panic hardware and automatic doors. Jecom is a dormakaba Certified Project Partner.
HINGE SYSTEMS
concealed and heavy-duty hinges, including TECTUS.
SLIDING CONTROL
sliding and folding door gear.
WINDOW AUTOMATION
door drives and window automation components.
ARCHITECTURAL HARDWARE
architectural door handles and fittings.
Why as Project Teams Work With Jecom
Project teams choose Jecom because we are a door specialist in Singapore that handles the whole door package, from schedule to site.
Certified partner
Jecom is a dormakaba Certified Project Partner.
One team from schedule to site
Specification, supply and installation are handled together, so fewer handovers between parties.
Established in Singapore
Founded in 2008
Clear documents
Schedules and quotations are easy to review and easy to check against the drawings. See examples on our projects page.
Ironmongery Specification FAQs
What is the difference between an ironmongery specification and an ironmongery schedule?
The specification describes the requirements, such as performance, finish and standards. The schedule applies them door by door, grouped into hardware sets. Most projects need both.
Can you prepare a schedule from architectural drawings?
Yes, if the drawings show door types and locations. We may ask a few questions about fire ratings, access control or finishes before we finalise it.
Can you work with the consultant's specification?
Yes. We follow the specification you give us. Where we suggest an alternative, we mark it clearly so your team can approve it.
Do you also supply and install the hardware?
Yes. Once the schedule is agreed, we can supply the items and install them on site.
How long does a schedule take?
It depends on the number of doors and how complete the drawings are. After we see your door list, we will give you an estimate.
Send Us Your Door List
If you are planning a new build, a fit-out or an upgrade, send us your door list or drawings. We can review them, ask questions and prepare a schedule. You can also contact us to talk it through.